Jonathon D Tanks, Yoshihiko Arao, Masatoshi Kubouchi,Network-level analysis of damage in amine-crosslinked diglycidyl ether resings degraded by acid, eXPRESS Polymer Letters, 2022, 231, 109560
Takuma Hanaoka, Hiroki Ikematsu, Suguru Takahashi, Natsuki Ito, Noriaki Ijuin,Hiroyuki Kawada, Yoshihiko Arao, Masatoshi Kubouchi, Recovery of carbon fiber from prepreg using nitric acid and evaluation of recycled CFRP, Composites Part B, 2022, 231, 109560
(https://https://doi.org/10.1016/j.compositesb.2021.109560)
Hadi Rezhji Maleki, B. Abazadeh, Yoshihiko Arao, Masatoshi Kubouchi,Selection of an appropriate non-destructive testing method for evaluating drilling-induced delamination in natural fiber composites, NDT and E International, 2022, 126, 102567
(https://https://doi.org/10.1016/j.ndteint.2021.102567)
Takuma Hanaoka, Yoshihiko Arao, Yoshihito Kayaki, Shigeki Kuwata, Masatoshi Kubouchi,New approach to recycling of epoxy resins using nitric acid: regeneration of decomposes products through hydrogenation, ACS Sustainable Chemistry and enginnering, 2021, 9, 12520-12529
(https://doi.org/10.1021/acssuschemeng.1c01737)
Takuma Hanaoka, Yoshihiko Arao, Yoshihito Kayaki, Shigeki Kuwata, Masatoshi Kubouchi, Analysis of nitric acid decomposition of epoxy resin network structures for chemical recycling, Polymer Degradation and Stability, 2021, 186, 109537.
(doi.org/10.1016/j.polymdegradstab.2021.109537)
Kazushi Shibutani, Jun Nakai, Ketkanok Aphichartsuphapkhajorn, Yoshihito Kayaki, Shigeki Kuwata, Yoshihiko Arao, Masatoshi Kubouchi, The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties, Journal of Applied Polymer Science, 2020, 138, 50311.
(doi.org/10.1002/app.50311)
Yoshihiko Arao, Jonathon D. Tanks, Kojiro Aida, Masatoshi Kubouchi, Exfoliation behavior of large anionic graphite flake in liquid produced by salt-assisted ball milling, Process, 2020.
(doi.org/10.3390/pr8010028)
Yasutomo Koga, Yoshihiko Arao, Masatoshi Kubouchi, Application of small punch test to lifetime prediction of plasticized polyvinyl chloride wire, Polymer Degradation and Stability, 171, 109013, 2020.
(doi.org/10.1016/j.polymdegradstab.2019.109013)
Yoshihiko Arao, Riichiro Kuwahara, Kaoru Ohno, Jonathon D. Tanks, Kojiro Aida, Masatoshi Kubouchi, Shin-ichi Takeda, Mass production of low-boiling point solvent- and water-soluble graphene by simple salt-assisted ball milling, Nanoscale Advance, 1, 4955-4964, 2019.
(doi.org/10.1039/C9NA00463G)
Yoshihiko Arao, Jonathon D. Tanks, Masatoshi Kubouchi, Akira Ito, Atsushi Hosoi, Hiroyuki Kawada, Direct exfoliation of layered materials in low-boiling point solvents using weak acid salts, Carbon, 142, 261-268, 2019.
(doi.org/10.1016/j.carbon.2018.10.063)
Yoshihiko Arao, Jonathon D. Tanks, Kojirou Aida, Masatoshi Kubouchi, Mechanochemical reaction using weak acid salts enables dispersion and exfoliation of nanomaterials in polar solvent, Journal of Materials Science, 54, 4546-4558, 2019.
(doi.org/10.1007/s10853-018-3156-9)
Hadi Rezghi Maleki, Mohsen Hamedi,Masatoshi Kubouchi, Yoshihiko Arao, Experimental study on drilling of jute fiber reinforced polymer (JFRP) composites, Journal of Composite Materials , 53, 283-295, 2019.
(doi.org/10.1177/0021998318782376)
Jonathon D. Tanks, Masatoshi Kubouchi, Yoshihiko Arao, Influence of network structure on the degradation of polu(ether)amine-cured epoxy resins by inorganic acid, Polymer Degradation and Stability, 157, 153159, 2018.
(doi.org/10.1016/j.polymdegradstab.2018.10.011)
Hadi Rezghi Maleki, Mohsen Hamedi,Masatoshi Kubouchi, Yoshihiko Arao, Experimental Investigation on Drilling of Natural Flax Fiber Reinforced Composites, Materials and Manufacturing Processes, 34, 283-292, 2018.
(doi.org/10.1080/10426914.2018.1532584)
Fumiya Mori, Masatoshi Kubouchi, Yoshihiko Arao, Effect of graphite structures on the productivity and quality of few-layer graphene in liquid phase exfoliation, Journal of Materials Science, 53, 10807-10815, 2018.
(doi.org/10.1007/s10853-018-2538-3)
Jonathon D. Tanks, Yoshihiko Arao, Masatoshi Kubouchi, Diffusion kinetics, swelling, and degradation of corrosion-resistant C-glass/epoxy woven composites in harsh environments, Composite Structures, 202, 656-694, 2018.
(doi.org/10.1016/j.compstruct.2018.03.078)
Masahiro Kusano, Shota Takizawa, Tetsuya Sakai, Yoshihiko Arao, Masatoshi Kubouchi, Simultaneous sound velocities and thicknesses measurement by the ultrasonic pitch-catch method for corrosion layer forming polymeric materials, Ultrasonics, 82, 178-187, 2018.
(doi.org/10.1016/j.ultras.2017.08.001)
Masahiro Kusano, Takafumi Kanai, Yoshihiko Arao, Masatoshi Kubouchi, Degradation behavior and lifetime estimation of fiber reinforced plastics tanks for hydrochloric acid storage, Engineering Failure Analysis, 79, 971-979, 2017.
(doi.org/10.1016/j.engfailanal.2017.06.004)
Yoshihiko Arao, Fumiya Mori, Masatoshi Kubouchi, Efficient solvent systems for improving productivity of few-layer graphene in liquid phase exfoliation, Carbon, 118, 18-24, 2017.
(doi.org/10.1016/j.carbon.2017.03.002)
Yoshihiko Arao, Yoshinori Mizuno, Kunihiro Araki, Masatoshi Kubouchi, Mass production of high aspect ratio few-layer-graphene by high speed laminar flow in liquid, Carbon, 102, 330-338, 2016.
(doi.org/10.1016/j.carbon.2016.02.046)
Takayasu Fujiura, Ryosuke Nakamura, Tatsuya Tanaka, Yoshihiko Arao, Effect of Jute Fiber’s Thermal Degradation on the Fiber Strength and its Polymer Composites, Advanced Materials Research, 1110, 7-12, 2015.
(doi.org/10.4028/www.scientific.net/AMR.1110.7)
Yoshihiko Arao, Masatoshi Kubouchi, High-rate production of few-layer graphene by high-power probe sonication, Carbon, 95, 802-808, 2015.
(doi.org/10.1016/j.carbon.2015.08.108)
Yoshihiko Arao, Taro Fukui, Tomoyuki Niwa, Hiroyuki Kawada, Dimensional stability of epoxy-based and cyanate-based carbon fiber-reinforced plastics, Journal of Composite Materials, 49, 1483-1492, 2015.
(doi.org/10.1177/0021998314535455)
Akira Inoue, Kazuya Morita, Tatsuya Tanaka, Yoshihiko Arao, Yasutake Sawada, Effect of screw designs on fiber breakage and dispersion of GFRTP in injection molding plasticization, Journal of Composite Materials, 49, 75-84, 2015.
(doi.org/10.1177/0021998313514872)
Keiko Natori, Kanchi Katanoda, Yuki Hashimoto, Yoshihiko Arao, Tatsuya Tanaka, Optimized design of strengthening structure with hat-shaped cross-section by carrying out buckling test, Key engineering, 627, 61-64, 2015.
(doi.org/10.4028/www.scientific.net/KEM.627.61)
Keiko Natori, Ryoji. Kishi,Yoshihiko Arao, Tatsuya Tanaka, Effect of mesostructure on strain rate dependent behavior in high strength steel sheets, WIT Transactions on the Built Environment, 137, 151-162, 2014.
Takaaki Minagawa, Tatsuya Tanaka, Yoshihiko Arao, Akira Inoue, The study of a CVT belt using the composite material of carbon fiber-reinforced thermoplastic resin, WIT Transactions on the Built Environment, 137, 177-188, 2014.
Kunihiro Araki, Shonosuke Kaneko, Kouki Matsumoto, Asahiro Nagatani, Tatsuya Tanaka, Yoshihiko Arao, Comparison of Cellulose, Talc, and Mica as Filler in Natural Rubber Composites on Vibration-Damping and Gas Barrier Properties, Advanced Materials Research, 844, 318-321, 2013.
(doi.org/10.4028/www.scientific.net/AMR.844.318)
Yoshihiko Arao, Sakae Nakamura, Yuta Tomita, Kyohei Takakuwa, Toshikazu Umemura, Tatsuya Tanaka, Improvement on fire retardancy of wood flour/polypropylene composites using various fire retardants, Polymer Degradation and Stability, 100, 79-85, 2014.
(doi.org/10.1016/j.polymdegradstab.2013.12.022)
Yoshihiko Arao, Syuji Yumitori, Hirofumi Suzuki, Tatsuya Tanaka, Kazuto Tanaka, Tsutao Katayama,Mechanical properties of injection-molded carbon fiber/polypropylene composites hybridized with nanofillers, Composites Part A, 55, 19-26, 2013.
(doi.org/10.1016/j.compositesa.2013.08.002)
Syuzi Yumitori, Yoshihiko Arao, Tatsuya Tanaka, Kazuto Tanaka, Tsutao Katayama, Increasing the interfacial strength in carbon fiber/polypropylene composites by growing CNTs on the fibers, WIT Transactions on the Built Environment, 55, 275-284, 2013.
Keiko Natori, Toru Kobayashi, Shu Tatsuta, Tatsuya Tanaka, Yoshihiko Arao, Buckling criteria for vacuum bottle based on finite element analysis, WIT Transactions on the Built Environment, 55, 339-349, 2013.
Natori Keiko, Nomura Fumiya, Yoshihiko Arao, Tatsuya Tanaka, Development of the continuous process method for ECAP using a tri-axis rotary die and microstructural evolution of semi-solid aluminum alloy, WIT Transactions on the Built Environment, 124, 107-117, 2012.
Jun Koyanagi, Yoshihiko Arao, Shin Utsunomiya, Shin-ich Takeda, Hiroyuki Kawada, High accurate space telescope mirror made by light and thermally stable CFRP, Journal of Solid Mechanics and Materials Engineering, 4, 1540-1549, 2010.
(doi.org/10.1299/jmmp.4.1540)
Yoshihiko Arao, Jun Koyanagi, Yukie Okudoi, Masanori Otsuka, Hiroyuki Kawada, Prediction of the relaxation behavior of residual stress in CFRP cross-ply laminate, Journal of Solid Mechanics and Materials Engineering, 4, 1595-1604, 2010.
(doi.org/10.1299/jmmp.4.1595)
Yoshihiko Arao, Jun Koyanagi, Shin Utsunomiya, Hiroyuki Kawada, Analysis of thermal deformation on a honeycomb sandwich CFRP mirror, Mechanics of Advanced Materials and Structures, 17, 328-334, 2010.
(doi.org/10.1080/15376494.2010.488533)
Yoshihiko Arao, Jun Koyanagi, Hiroshi Terada, Shin Utsunomiya, Hiroyuki Kawada, Geometrical change of quasi-isotropic laminate under a hot and humid environment, JISSE-11, 2009. 荒尾与史彦,小柳潤,宇都宮真,寺田裕,川田宏之, CFRP直交積層板の高温・多湿環境下における形状変化挙動, 複合材料学会誌, 35, 241-247, 2009.
(doi.org/10.6089/jscm.35.241)
Atsushi Hosoi,Yoshihiko Arao, Hiroyuki Kawada, Transverse crack growth behavior considering free-edge effect in quasi-isotropic laminates under high-cycle loading, Composites Science and Technology, 69, 1388-1393, 2009.
(doi.org/10.1016/j.compscitech.2008.09.003)
Yoshihiko Arao, Jun Koyanagi, Shin Utsunomiya, Shin-ich Takeda, Hiroyuki Kawada, Analysis of time-dependent deformation of a CFRP mirror under hot and humid conditions, Mechanics of Time-Dependent Materials, 13, 183-197, 2009.
(doi.org/10.1007/s11043-009-9081-1)
Yoshihiko Arao, Jun Koyanagi, Shin Utsunomiya, Hiroyuki Kawada, Time-dependent out-of-plane deformation of UD-CFRP in humid environment, Composites Science and Technology, 69, 1720-1725, 2009.
(doi.org/10.1016/j.compscitech.2008.08.029)
Yoshihiko Arao, Jun Koyanagi, Hiroshi Hatta, Hiroyuki Kawada, Analysis of time-dependent deformation of CFRP considering the anisotropy of moisture diffusion, Advanced Composite Materials, 17, 359-372, 2008.
(doi.org/10.1163/156855108X385276)